Problems with uploading data to the server
Problems with sending data to the server can be caused by many different factors. Individual causes are closer, starting with the most common.
WHY not recorded on the DATA SERVER
1. Target your phone is not connected to the Internet
- phone is switched off
- the phone has a data limit overdrawn
- phone does not signal
Solution: Wait until the phone is turned on again, it gets back to the signal, respectively. Wait until the data limit in the new moon resumes, or when the phone connects to WiFi.
2. Application has been removed from this phone
- on the phone was made factory reset
- application has been removed by the user
Solution: reinstall the application into the target phone.
3. Application of the phone is blocked
- Applications can be blocked by antivirus
- Applications may be blocked applications babysitter particularly data traffic and battery saving
Watchdog mobile applications scan, and detect whether any other applications too much burden on the phone (especially in terms of data traffic and battery consumption). Evaluate if an application like a heavy burden, suggests the user whether he wants to close this application.
Solution: Check the settings on the target phone applications that could MobilŠpion block. In guarding applications must be set to the application MobilŠpion ignored. The optimal variant is to do this already when first installed. If you have enough time to install, let MobilŠpiona after installing the phone for several hours (preferably whole day) run, and wait to see if any monitoring application does not detect MobilŠpion as burdensome. If there is a warning on the phone, select "ignorovovat", "not to propose again," etc. This ensures that the application will no longer MobilŠpion overlooked.
Loading data WITH THE DELAY
1. Was exceeded the limit set for data upload over 3G, so the data is recorded only when the phone is connected to WiFi.
Solution: Increase the limit set by your administration in the "SET".
2. On the SIM card in the phone's data limit has been exceeded
Solution: Wait until the next month before the data limit on the card is restored. Until then the data will be uploaded to the server only when the phone is connected to the Internet via WiFi. To reduce demands on application data traffic, change the setting to send audio recordings on the "On Demand". Subsequently, the server will be automatically sent to all the audio recordings, but they only sent those calls where you through the application requesting.
0 komentarji:
Objavite komentar